How To Hang A Tv On Stucco Wall

People are often confused nearly how to mount their Television receiver onto a stucco wall. In fact, many people (wrongfully) believe that TVs tin't exist mounted onto Stucco.

Still, you'd be surprised to know that the process for mounting a Television receiver onto a Stucco wall is essentially the same as a brick wall.

Quick summary

In this post, we will provide step-by-stride instructions you would need to effectively and securely mountain your Television onto a Stucco wall.

Nosotros will provide a list of all the tools and materials you lot will need. Additionally, we volition besides get over some full general tips that volition make the job easier.

So without further ado, allow's get into information technology.

Supplies Needed to Mount a Boob tube onto Stucco

Before we get started with the bodily procedure of installation, it's a proficient idea to get all of the tools yous will need in one place.

If you lot do that, then you won't have to halt the installation process and go look for a certain tool every time you're virtually to perform the next pace.

The tools yous will demand to mount a TV onto a Stucco wall are:

• A Television set mount: They come in diverse types and sizes. Brand certain that you buy one that can appropriately support the weight of your TV.

• A ability drill: Any blazon of power drill you have can do this job. However, nosotros would suggest a cordless drill that has a hammer part so that yous can work unencumbered.

• Masonry drill bits: Masonry bits take tips like chisels and wings that are designed to drill into heavy-duty surfaces such equally Stucco.

• A level: This is necessary to ensure that the mount y'all install for your TV is not crooked in the slightest.

• A pencil or marker: Either i of these or anything else similar would be fine. Yous just need something that tin can leave a noticeable enough market on the wall.

• Anchors and/or concrete screws: Both plastic wall anchors, too as, physical screws volition piece of work fine with Stucco walls. If you accept a heavier Television receiver (over 75 pounds) then we recommend concrete screws. If your TV is lighter than that, and so plastic wall anchors will be more than enough.

• Driver bit(s) for the anchors or screws: Depending on whether you are working with plastic wall anchors or physical screws, you will need the appropriate commuter fleck to properly install them.

• Washers: You lot may notice that the slots and holes on the mounting hardware for the mount may be as well large for a screw head. In that case, you lot volition need appropriately-sized washers.

• A tape mensurate: Yous will need a tape measure to accurately have note of all of the distances.

• A hammer: You lot will need this to tap the anchors into the wall.

• A small vacuum: Drilling into a Stucco wall volition definitely create a lot of dust. A vacuum tin assist remove all this dust once you are done with the installation process.

• Prophylactic gear: We recommend that y'all have a pair of rubber goggles likewise as a dust mask to ensure that you lot remain rubber throughout the installation process.
• Painter's record: Yous will need this to mark your drill.

Once you have gathered all of these tools, you lot are ready to offset installing the Television mountain onto your Stucco wall.

How to Mount a Tv set onto a Stucco Wall (Step-by-Step Instructions)

With every step of this procedure, make sure that you read all of the instructions carefully earlier you take any action.

You don't want to practice irreparable damage to your wall only to discover out you've made a mistake considering of which yous tin't mountain your TV in that location.

Let's get started:

Footstep ane: Before we do any drilling, you must first choose a location for your Television receiver mount.

It'south a skilful thought to cull a location that has a lot of space, makes sense for your primary viewing bending, and is close to a power outlet.

Step ii: Once you lot've decided the general location, you need to figure out the exact height at which you want to install the mount.

In general, the middle of your TV needs to be at middle level for information technology to exist at an appropriate height. However, you demand to take your wall mount into account every bit well.

For this, attach the Goggle box bracket onto your Television set according to the manufacturer'south instructions. Accept your record measure and measure the distance from the wall subclass to the bottom of your TV.

You will need to add this to your TV'south desired height to find the appropriate location for the mounting bracket.

For case, if your Goggle box's desired height is 42 inches and the distance between the bottom of the Tv set and the mounting bracket is 8 inches. And so, the appropriate acme for the mounting bracket volition exist 50 inches.

Once you have figured out the appropriate height, yous can remove the wall bracket from the TV.

Step 3: Hold upwardly the wall mountain against your wall so that its lesser is at the desired height that you calculated in step ii.

Utilise a level to make sure that wall mount is placed evenly on the wall. Then, use your pencil or marker to mark each location on the wall where a mounting hole needs to exist drilled.

Important tip: Depending on the manufacturer and model of your wall mount, it may have several unlike mounting holes for different sizes of TVs.

Make certain that y'all but marker the holes that are required to properly attach your TV's size.

Stride 4: Attach the accordingly-sized masonry drill flake for the plastic wall anchors or physical screws that yous purchased.

Marker the drill bit according to a length that is just slightly longer than the plastic anchors or concrete screws that you have. Mark your drill by wrapping a small piece of painter'due south tape on that specific bespeak.

If yous have a drill that has a hammer part , set it to that. Otherwise, set it to high speed.

Step 5: Place the tip of your drill onto one of the marks that you placed in footstep 3. Squeeze the trigger slightly to start excavation into the Stucco wall.

As it starts to dig in, y'all can first to increase the drill speed past pulling the trigger with more force. It'south a proficient idea to occasionally pull the scrap out slightly in order to remove the dust from the hole.

Repeat this process for all of the marked locations.

Footstep half-dozen (this step is if you are using plastic wall anchors. If y'all are using physical screws, skip to step 7): Use your hammer to hammer the plastic wall anchors into place into your drilled holes.

Delight note that plastic wall anchors don't demand a ton of force to be flush with the wall. If you are having problem hammering them in properly, then in that location'south a risk you may need to clean out some of the dust from the hole.

You can do this by holding up the nozzle of your small vacuum up to the hole.

Step seven: Slide the washers you got onto the physical screws if needed.

Hold the wall mountain in place and insert the screws through it and into the holes that you drilled by hand. Tighten them up past hand as much as y'all can.

This might be hard to do solitary. Hence, nosotros highly recommend that y'all get a friend or a family fellow member to assistance you with this stage of the installation process.

Footstep 8: Later you accept turned the screws as much equally you tin can by hand, attach the commuter bit to your drill and use it to tighten each screw.

Bank check the wall mount to ensure that it's level and then go along to tighten the balance of the screws with your drill.

Pace 9: If yous take a two-piece subclass, and so yous tin but install the TV brackets that are already fastened to your Goggle box onto the bracket on the wall.

Many of them have locking mechanisms or bolts. Hence, be certain that you read the instructions provided past the manufacturer to ensure the mount is correctly installed.

If you have a one-piece bracket, and then you should ask for help from a friend or family member then that they concur the Tv set in place while you tighten the screws between the TV subclass and the TV.

Step x: Make certain to spend some fourth dimension performing cablevision management.

The entire point of a Goggle box mount is to requite your living room a clean and tidy expect. You won't really attain that if cables and wires are flinging all about.

One time you mount the TV, attach all of the cables you will regularly apply with it.

This might include:

• The ability cable
• An HDMI cable
• Any cables connecting to other components such as entertainment centers, game consoles, Blu-ray players, etc.

Once you lot accept all of the cables in place, you can get-go to recall about how to manage them.

The easiest and simple way to do so is to hide them behind furniture such as table-tops.

However, if you want to put some more endeavour into it, then it tin can be a good idea to use adhesive hooks or something similar to neatly mountain the cables onto the side of the wall.

Frequently Asked Questions (FAQs)

How Much Weight Can a Stud Agree?

It doesn't depend on the stud but it rather depends on the type of screw you use to hold upwards the object.

A thin boom tin can typically hold up to xx pounds of weight. On the other hand, a fibroid threaded screw might be able to concord up to 100 pounds or fifty-fifty more.

Is it Amend to Wall Mount Your Television or to Put information technology on a TV Stand?

It actually depends on what your needs are. Neither one is better than the other as both of them have their pros and cons.

TV mounts are more difficult to install but save you a ton of infinite. On the other manus, TV stands are much easier to install but accept up a lot more space.

How High Should I Mount My Tv set?

Your TV should be mounted so that the eye of it is level with your eyes. This can vary a lot depending on your height and the superlative of your sofa.

The typical peak for most people is 42 inches.

Do TV Mounts Take to Get Into Studs?

Not necessarily. Most mounts are designed to fit into studs but you tin can definitely notice i that tin can merely fit into concrete and brick walls without studs.

You lot can even fit mounts into Drywall without studs by using toggle bolts, hollow wall anchors, or something similar.

How Do I Mount a Telly on the Wall Without Damaging the Wall?

There's no real answer to this except to just piece of work carefully.

When you lot drill into the wall, outset slowly, and in one case the drill starts to dig in, increase your speed.

If you start off at high speed, you take chances making cracks in the wall.

Wrapping Things Up…

So there you go. Mounting a Tv set onto Stucco is no more than difficult than mounting it into a brick or concrete wall.

Every bit long as yous have planned information technology properly and have the correct tools at your disposal, you tin definitely install your Television mountain securely onto a Stucco wall.

If you accept any more questions, please allow us know in the comments section below.

Source: https://eagletvmounting.com/how-to-mount-a-tv-on-stucco/

Share this post